Informasjon
Teleslyngeforsterker for mindre lokaler eller resepsjoner og pulter.
Fungerer opp til 40 m2 alt etter lokale forhold.
Inngang for mikrofon/linjeinngang og linjeinngang.
Teleslynge bør kun monteres av opplært personell og skal ha dokumentasjon på dekningsområde etter endt installasjon.
Kontakt oss for tilbud på installering og montering.
INPUTS
| Power | 12V DC @ 1.0A max. Fuse fitted to PCB, type T 1.6A L Green LED Power indicator |
| Input 1 | Microphone input Suitable for unbalanced electret microphone 3.5mm mono jack socket Input impedance 8kΩ. 6v bias via 10kΩ source Sensitivity -60 dBu for max output Overload level -14 dBu. Recessed control on front panel |
| Input 2 | Switchable line / microphone Recessed switch on connector panel Microphone as for input 1 Line input: Input impedance 820kΩ Sensitivity -20dBu for max output Overload: >+20dBu |
OUTPUTS
| Drive voltage | >3.2VRMS >4.5Vpk at maximum output current |
| Drive current | 2.4ARMS 3.4Apk continuous 1kHz sine wave Short term peak >4.8Apk LED indicator on front panel |
| Loop resistance | 0.3Ω to 1.0Ω resistive or |
| Loop connector | Vibration proof clamps, accept 0.5 to 1.3mm2 |
THERMAL HEAT CHART
| Idle | 1/6 peak Output Current (Speech) | 1/3 peak Output Current (Pink noise) | Full Power | ||||||||
| Driver | Channels | Current (ARMS) | Load Resistance (Ohms) | AC In (W) | BTU | AC In (W) | BTU | AC In (W) | BTU | AC In (W) | BTU |
| CLD1 | 1 | 2.4 | 0.5 | 0.6 | 2 | 4 | 13 | 8 | 22 | 13.704 | 37 |
AUDIO SYSTEM
| Frequency response | 80Hz to 6.3kHz ±1.5dB |
| Automatic gain control | AGC optimised for speech Dynamic range >36dB Green LED indicator on front panel |
| Metal loss correction | 0 to 4.5dB/octave Recessed control on front panel |
PHYSICAL
| Cooling | Natural convection |
| Dimensions | 128mm, 74mm, 35mm |
| Weight | 280g |
| Environment | IP20 : 20 to 90% relative humidity, -20ºC to 50ºC |
| Mounting | Horizontal or vertical panel or wall mount, with 2 screw fixings |
Produsent
AMPETRONIC
