Informasjon
With a peak output capability of 128dB at 1 metre, it is the ideal solution for a multitude of premium stand-alone and distributed sound reinforcement requirements — from touring, theatre and portable live sound, to concert hall and HoW installations, AV events and stage monitor use.
Features
- Ultra-compact, self-powered two-way system
- Coaxial Differential Dispersion™ technology
- Onboard Class D amplification and DSP
- Dante™ Digital Audio networking
- Global mains operation with Power Factor Correction
- User-rotatable CDD™ driver
- Vertical and horizontal mounting options
- Tour-grade, multi-angle plywood enclosure
- IP24 rating option with rain cowl
- Comprehensive mounting accessories
Aplikasjoner
- Live sound reinforcement
- Theatre sound
- Corporate AV events
- Fixed installations in concert halls, ballrooms and HoW
- Stage monitor and sidefill
- Bars and clubs
Acoustics
- TYPE Compact, Coaxial Differential Dispersion powered two-way system
- FREQUENCY RESPONSE (1) 62Hz – 20kHz ±3dB, -10dB @ 50Hz
- DRIVER LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF
- HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
- INPUT SENSITIVITY -30dBu for 100dB SPL
- MAXIMUM SPL (2) 122dB continuous / 128dB peak
- DISPERSION 110°-60° horizontal, 60° vertical (user-rotatable)
- CROSSOVER 1.5kHz Active LR8 with low latency HF FIR equalisation, Balance presets for pole mount/ pole mount with sub/ stage monitor
Module
- Audio input
- CONNECTORS Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
- ANALOGUE INPUT IMPEDANCE 20 kO balanced to ground
- MAXIMUM ANALOGUE INPUT LEVEL 24.6 Vpp (+21dBu), over voltage protected
- INTERNAL PROCESSING Multi-channel DSP, programmable via TCP/IP using VU-Net software, PEQ/shelving filters, Up to 48dB/Oct HPF, Low latency HF FIR filters, Up to 200ms input delay, Pre-set selection via rear panel switch
Network
- CONNECTORS 2xNeutrik® Ethercon
- PROTOCOL TCP/IP and UDP/IP
Amplifier
- TYPE 2 channel switch-mode, class D, Bridged Tied Load + 1 channel switch-mode, class D
- PEAK OUTPUT POWER 2500W total, 2000W LF, 500W HF
- AVERAGE EFFICIENCY 89%
- COOLING External convection cooled, with internal fan
- MAXIMUM AMBIENT TEMPERATURE 40°C (104°F) for full output
Power Supply
- TYPE Switch mode, fixed frequency with PFC
- AC INPUT OPERATING RANGE 85 – 265V ~ AC, 50 - 60Hz
- POWER FACTOR > 0.98
- NOMINAL POWER CONSUMPTION 160W
- MAINS CONNECTOR Neutrik® Powercon True1
Mechanical
- ENCLOSURE Extensively braced multi-laminate plywood.
- FINISH Textured black PU coating.
- PROTECTIVE GRILLE HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth.
- FITTINGS Top hat for pole mounting 15 x M8 mounting points, Two side pocket handles, Optional weather protection cowl
- IP RATING IP24 factory option available
- DIMENSIONS (W) 359mm x (H) 580mm x (D) 373mm
- WEIGHT 28kg (61.6lbs) excluding Transit cover
- ACCESSORIES Transit Cover, Optional wall, yoke and universal brackets
?
Produsent
Martin Audio